How To Mount A Vise – [A Pro Guide]

A vise is an essential part of a workbench. Bench vices are an engineer’s vices that are made to hold the object in a fixed position. The vise is mainly used by carpenters and metalworkers. 

They use it to hold the wood in a position, sticking glue and dry, etc. The vise is also used to cut materials. If you have a vise beside your handy bench will serve a multi-purpose like sawing, drilling, . 

When you are a passionate woodworker or a metalworker, the vice will help you a lot. The most efficient vice has marked that one which remains unchanged for years and easy to handle. 

Now the question may arise in your mind that how to mount a vise. Here we will get an overview of the simple mounting process of a vice. Let’s dive deeper.

How to Mount A Vise – A Complete Guideline

To mount a vise, first of all, you have to collect some instruments. There are some selective materials and tools to fix the vise on the bench. The materials, you have to fit with the vise and the tools will help you in the whole operation. 

Arrange all the vital instruments and bring the model. If the vise has any instructions or guidelines to follow, you should go through them on the paper carefully. 

There are some brands that don’t follow the traditional procedures of assembling a vise. Rather they provide their procedures. 

Estimated Cost

 If you want to get a quality product with comfort, you must spend a handsome amount of money. A woodworking vise may cost $30 to $400. And a metalworking vise may cost $50 to $700. 

An effective vice accelerates the quality of your work. And the whole action of mounting a vise may take $100 to $200 if you perfectly mount the vice in your working table.

The Time Needed

 Usually, the total action takes 10 to 15 minutes to mount the vise. But experts need only 5 to 7 minutes to conduct the whole job.

Tools

  • Pencil
  • Cordless drill
  • Drill bit
  • Socket
  • Wrenches

Materials:

  • Bolts
  • Washers (top & underside)
  • Lock washers
  • Nuts

Steps On How To Mount A Vise

If you gather all the tools and materials, it won’t be a hard task to mount a vise. It’s time to amalgamate all the tools and materials to mounting the vise. There are some easy steps of mounting a vise, these are:

Trace Out The Mounting Hole

 First of all, you have to find out the hole of the vise where you want to mount. Mark up the point with a pencil. Sometimes a mounting templet is also provided with the vise.

 If you found any, try to follow the instruction of the given templet. It will make your mounting easier. Make sure that the description of that templet and your vise match. 

Usually, most of the person is right-handed, and they find it helpful if the vise is mounted on the right side of the table. But positioning the vise depends absolutely on the choice of the user.

Drill Out the Hole

 The second and the most crucial step of mounting a vise is drilling. Select the right size of the drill bit. Now drill out the Pencil marked area with very mild pressure. 

While drilling, never put high pressure because it may cause the soft materials to splinter. You also have to be careful to put hard pressure while working on the plywood.

Fitting The Washer

 The fitting of the washer is very important. You must test whether the washer fits properly on the holes of the vise base or not.

 For a better fitting of the washer, you can use a bench grinder or metal file to make the big holes a bit smaller.

Bolt Adjustment

 It will help you to smooth the portion of the edge. It’s time to adjust a bolt with the washer before putting it together with the drilled hole of the vise. 

Try to use the strong bolt of the correct size. During the operation, you must notify the fact that you have used your customized washer to avoid sizing problems.

Setting The Washer

 In this stage, you have to set a washer under one hole. Lock the washer carefully and nut properly on the beneath of the bolt. 

You have to tighten all of the bolts so that none of them displaced and create obstacles. 

Tighten The Bolts

 At the final step, you have to use the socket wrench and standard wrench. With a socket wrench, you can tighten the bolt in the right place. 

And use a standard wrench to fix the nut. It will ensure the stability of the vise. The vise will perform well if you assemble it appropriately. Again, check the bolt and nut further before use.

Thinks to Notice Carefully

Though the step of mounting a vice is easy, you have to carefully handle some issues. The position of the jaw face is vital. It should be placed in such a way that its frequent release makes you move the vise with a little effort.

 If it has any pop-up stop, you don’t need to drill a doghole in the movable jaw. If you are a right-handed person, set the vise on the front right corner of your reloading bench.

 Always be careful while putting the pressure. Keep at least 4inches of overhanging in your workbench so that you could put glue, drill on something straight.

Faqs

 

There are some other questions that people want to know about mounting a vise. The answer is given below.

How to Mount A Vise With Leg Bolts?

 

Leg bolts can be used to mount a vise. If you want to use leg bolts, drill the same holes parallel with the leg. Many people use it to have a survey, and a leg screwed vise can be placed under the bottom of the bench.

What Would Be The Most Suitable Place For Setting Up A Vise?

 

Placing a vise is vital to get the facilities of it. Basically, a vise is placed by fronting the stationary jaw face. It could allow you to clamp large pieces. And you can hang it from the tabletop. 

But the placing depends on your convenience. If you want sustainability, you can separate the bench and the vise by placing steel between them or under the bench.

How to Choose The Perfect Bolts To Mount A Vise?

 

To make your vise fixed in a place bolt must be strong enough. You can use a few long bolts like 3/8″ or 1/2″ bolts. 

These bolts are so long that they can go through the vise and the bench. Again, you can tighten the bolt with the nut strongly.

How to Place An Overhang to Make A Workbench Handy?

 

If your bench has an overhang of 4 inches, it is perfect. If you can customize it, make sure that it has an overhang of 4 inches at the front and at the side of the bench. The size is most beneficial for using large clamps whenever it needs.

Final Words

To a wood or metal worker, a vise is an inevitable instrument. It helps for planning, sawing, routing, and many other instrumental operations on the workbench. 

It increases the success of your handwork, hand plane, router, or table saw. It is such a device that makes you free to do whatever you want to do with wood. However, there are differences between Woodworking vises and metalworking vises. 

If it is a metalworking vise, place it on the top of the bench, and if you feel comfortable with the woodworking vise, place it under the bench surface. 

A vice is a helping device that makes you fix a thing on which you want to work on. A good combination of all the material in its perfect place will help you to get the utmost benefit of the vise. 

Leave a Comment

Your email address will not be published. Required fields are marked *