How to unclog a Vacuum Hose

A vacuum cleaner is an essential cleaning tool. The vacuum cleaner uses a vacuum hose to direct dust to the storage point. The vacuum hose is a crucial component in every cleaner.

One of the main issues that you might experience with your cleaner is clogging. To enjoy an incredible performance, you need to know how to unclog a vacuum hose. This will help you get rid of the materials and other substances that might affect the performance of the machine.

A vacuum cleaner might look to be strong in the out, but it is very delicate in the inside. This is why you need to handle them with care to avoid clogging. Even though no matter how careful you are, you cannot have a 100% guarantee of no clogging issues. You need to understand how to unclog.  In this article, we are going to learn more about clogging, what it is, and how to unclog the vacuum hose.

“What is Clogging?”

When you handle a vacuum cleaner inappropriately, or it sucks something too big. The cleaner is likely to malfunction. In this proses, the vacuums hose ends up blocking such that materials sucked by the vacuum cannot go through. This situation is what we call clogging.

Though clogging does not mean complete damage of the Vacuum, cleaner. There will be some shortcomings, which can be solved if you take apply early measures.

“Symptoms of Clogging”

  • The hosepipe is not able to suck dust properly.
  • The motor is unable to function correctly.
  • It has an unusual sound when it is cleaning.
  • The Vacuum cleaner overheats easily.
  • The Vacuum cleaner stops to pick dust.

“The Steps to Take On To Unclog a Vacuum Hose”

Cleaning a vacuum hose is very important. It is a good practice to ensure you Vacuum cleaner works at its maximum level. It is advisable that you clean it regularly even when it has not clogged.

  • For pulling the clog you will need;
  • A screwdriver
  • Needle-nose pliers.

For the sake of cleaning a vacuum when it has clogged here are the simple steps you need to take.

Step 1: Turn off the Cleaner and unplug it.

The first step is to turn off the power source of the vacuum tube. This is to avoid dangers or risk of being electrocuted. Unplug it from the wall for more safety. This is because you might accidentally switch on the circuit which might lead to being electrocuted.

“Step 2: Remove any attachments to the hosepipe”

The next step is to remove all the attachments leading to the hose pipe. Then look through the hose and check whether you can reach the clog inside. If not try using an object to pull it e.g. Pliers.

“Step 3: Take off the Main house from the Vacuum”

This is the hose that is connected near the base of the roller. To find it look at the bottom of the vacuum. Pull it off from the port to access the lower house.

Read the manufacturer manual to disconnect properly according to the brand of vacuum cleaner you are using. This is because not all vacuum cleaner’s brand is the same.

“Step 4: Unscrew the Lower hose from the Vacuum cleaner’s body.”

After that, you will now unscrew the lower hose which connects to the base of the vacuum. This is the point where the main hose is plugged into the machine. To do this locate the screw that is responsible for holding the lower hose.

Then unscrew it carefully using the suitable screwdriver. The place the screws in a place you will be able to see them. In some case, you will just need to pull it if it is not screwed in.

“Step 5: Using sharp pliers grab the clog and pull it.”

After identifying the lower hose, now, look through the hose to check where the clog is. Confirm the distance from the opening to know the length of the pliers to use. In other cases, you might not be able to see the clog.

If by any chance you look through the lower house, and you don’t see a clog. Then the problem is not clogging. The problem might be the rollers. You will instead now shift your focus to repairing the rollers.

“Step 6: Pull it until it comes out of the hose”

After identifying the clogging and its location. Using a pair needle-nose pliers pass it through the hose. Once you feel the clod, pinch it with the pliers carefully. Then pull the clog out of the hose.

For your benefits, you can examine it to get to know where it might have originated. This will help you avoid the same mistake any other time.

“Step 7: Confirm carefully that there are no other materials in the hose.”

After removing the clog, you will now need to check if there is another. This is because there can be a possibility of two or more clogs though in rear cases.

Confirm carefully that there is nothing left. Would you like to repeat this process? Not this is why you need to confirm carefully to ensure that you don’t find yourself in such a situation again any soon.

“Step 8: Reconnect back the hoses to your Vacuum”

After that hold the lower hose towards the body and screw it back to its position. Tighten the screws using a screwdriver.  Ensure you tighten the screws are well such that it does not move. Then reconnect the main hose in its position carefully.

Then turn on your vacuum and test whether it is working efficiently.

“Final Verdict”

We have looked at what is clogging, its cause, and also how to unclog a vacuum hose. The above are the recommended steps you need to take any time you think that the hose is clogged. Take the above measures, and you will have your Vacuum cleaner working correctly.

Leave a Comment

Your email address will not be published. Required fields are marked *