Dewalt Weed Eater Won’t Spin – Problem Fixing Guide

Dewalt Weed Eater is a popular brand of string trimmers used for cutting and trimming grass and weeds. These powerful tools are available in various models and sizes, operating on battery or gas power.

Many gardeners and professionals trust Dewalt Weed Eaters for their durability and reliability. If your Dewalt weed eater refuses to spin, Don’t worry, you’re not alone. Many people face this frustrating issue and have no idea how to fix it. But fear not because we’re here to help you troubleshoot and get your weed eater back in action.

Here we will cover why it is important to fix the Dewalt weed eater won’t spin problem and guide you through various methods to fix the problem easily. From using a wrench or screwdriver to checking the gear assembly and drive belt, we’ll walk you through step-by-step instructions on diagnosing and resolving the issue.

Dewalt Weed Eater Won’t Spin Fix The Problem Easily

A broken weed eater can ruin the appearance of your lawn or garden. Fixing it saves money and extends the life of your equipment. A functional weed eater makes weed removal easier and allows for efficient yard maintenance. Fixing it yourself gives you a sense of accomplishment and saves time. Here we provide a step-by-step guide on dewalt weed eater won’t spin.

1. Fixing The Problem With The Help Of A Wrench

To address a common issue with Dewalt weed eaters, you can use a wrench to resolve the problem of the trimmer head not spinning. Removing the trimmer head from the unit using a wrench allows you to inspect it for any tangled or wrapped-up debris causing the issue.

Clearing out debris and ensuring the trimmer head spins freely should help resolve the problem. However, if the trimmer head still doesn’t spin even after cleaning, it may be necessary to replace the trimmer head or seek assistance from a professional.

2. Fixing The Problem With The Help Of A Screwdriver

If your Dewalt weed eater is not spinning, it could be due to issues with the drive cable or the cutting head. For safety, start by disconnecting the spark plug wire. Then, using a screwdriver, remove the screws holding the cutting head in place. Inspect the drive cable for any damage or wear and replace it if needed.

Additionally, check the cutting head for debris or tangled grass that may inhibit rotation. Ensure you clean out obstructions and, reassemble the cutting head, tighten the screws securely. By following these steps, you can fix the problem with the help of a screwdriver.

3. Fixing The Problem With The Help Of A Drill

If your Dewalt weed eater encounters the issue of not spinning, it may point to a problem with the drive shaft or clutch assembly. One potential solution involves using a drill to manually rotate the drive shaft and clear any obstructions that might be present.

To begin, prioritize safety by disconnecting the spark plug wire. Locate the access hole on the trimmer head and insert the drill bit into it. Slowly rotate the drill counterclockwise to loosen any tangled string or debris that may have accumulated. Reattach the spark plug wire once you remove the obstruction and test if the weed eater spins properly.

4. Check If You Have Properly Assembled The Gear

An incorrectly assembled gear is one possible reason for a Dewalt weed eater not spinning. It is essential to verify that you firmly attach and align the gear with the motor shaft. If the gear appears loose or misaligned, it might require tightening or adjustment.

Consult the user manual for guidance on correctly assembling and aligning the gear. If you need to resolve the spinning functionality issues of your Dewalt weed eater, you may need to replace a damaged or worn-out gear with a new one. It is crucial to ensure proper assembly of the gear.

5. Check If You Have Worn Or Broken The Belt

To determine if the belt is the cause of your Dewalt weed eater not spinning, you can inspect it for signs of wear or damage. Begin by removing the cover of the weed eater and visually examining the belt. If you notice any fraying, cracks, or other forms of damage, the belt likely needs to be replaced.

Replacement belts for Dewalt weed eaters can be found at hardware stores or online retailers. It’s crucial to follow the manufacturer’s instructions when replacing the belt to ensure proper installation and optimal functionality of the weed eater.

6. Check For Foreign Objects In The Gear

If your Dewalt weed eater is not spinning, the first thing to check is for foreign objects that may be stuck in the gear mechanism. Remove the trimmer head and inspect the gears for any debris, such as grass clippings or twine, that may be causing a blockage.

Use a small brush or toothbrush to remove debris from the gears. Once the gears are clear, reattach the trimmer head and test to see if it spins properly. If the problem persists, a mechanical issue with the gear mechanism may require professional repair or replacement.

7. Clear The Jammed Weed Eater Of Any Obstructions

To resolve the issue of your Dewalt weed eater not spinning, it is important to check for any obstructions or tangled weeds that may be causing the problem. Before attempting to clear any obstructions, turn off the weed eater and disconnect it from the power source.

Use a pair of gloves and carefully remove any debris or tangled weeds from around the spinning head of the trimmer. Additionally, inspect the cutting line to check if it is tangled or worn out, and replace it if needed. In such cases, it may be best to seek assistance from a professional for repairs. Regular maintenance, including cleaning and lubricating the weed eater, can help prevent future spinning issues.

8. Checking If The Drive Belt Is Tight

To determine if the drive belt on your Dewalt weed eater is the cause of it not spinning, start by turning off the weed eater and disconnecting it from the power source. Locate the drive belt cover, usually positioned near the motor, and carefully remove it by unscrewing or unclipping it. Once the cover is off, inspect the drive belt to see if it’s loose or damaged.

If it’s loose, adjust the tension to tighten it. Alternatively, replace the drive belt if it’s worn out or broken. If the drive belt is in good condition and properly tightened, another underlying issue may be preventing the spinning mechanism from functioning correctly.

9. Checking If The Throttle Is Open

Check if the throttle is open to troubleshoot a Dewalt weed eater that won’t spin. Ensure the throttle trigger isn’t stuck or blocked, preventing it from fully opening. Also, inspect the throttle mechanism for any debris or dirt and clean it if necessary.

If the throttle is open, but the weed eater still won’t spin, examine the drive shaft and cutting head for damage or blockages. Also, ensure the cutting line is properly installed and not tangled or broken. If these steps don’t resolve the issue, it may be best to seek professional inspection and repair.

10. Adjusting The Throttle Cable

One common issue that can cause a Dewalt weed eater not to spin is a problem with the throttle cable. The throttle cable connects the trigger to the engine and controls the speed of the cutting head. If the cable is loose or misaligned, it can prevent the cutting head from spinning.

To fix this, check the connection between the throttle trigger and cable. Ensure the cable is properly seated in its housing and not tangled or obstructed. If it’s loose, tighten it using an adjustable wrench or pliers. Proper throttle cable adjustment can help resolve spinning issues with the Dewalt weed eater.

11. Cleaning The Engine

When a Dewalt weed eater refuses to spin, a common culprit is a clogged or dirty engine. Safety should be a priority, so remember to turn off the weed eater and disconnect the spark plug wire. Take a moment to clear away any debris or grass clippings that may have accumulated around the engine and air filter.

Next, brush or compressed air to clean out any dirt or debris blocking the engine. It’s also essential to check and replace the spark plug if necessary. Once everything is cleaned and inspected, reassemble the weed eater and test if it spins properly. If not, further troubleshooting or professional repairs may be required.

12. Replacing The Drive Belt

If your Dewalt weed eater is not spinning, it could be due to a worn or broken drive belt. To resolve this issue, you’ll need to replace the drive belt. Start by removing the outer housing of the weed eater to access the drive belt. Once you’ve located the drive belt, check if it is loose, worn, or broken.

If necessary, purchase a replacement drive belt that matches the model and specifications of your Dewalt weed eater. Follow the manufacturer’s instructions carefully to install the new drive belt. This will ensure that your weed eater spins properly and is ready for use.

Things To Keep In Mind While Fixing The Dewalt Weed Eater Spin Problem

Troubleshooting a Dewalt weed eater that won’t spin, several key factors must be considered. First, check the power source to ensure the weed eater is properly plugged in or the battery is fully charged. Next, inspect the cutting head for any tangled weeds, debris, or obstructions preventing it from spinning.

Additionally, examine the trimmer line and replace it if worn out or broken. It’s also important to check the drive shaft to ensure it is properly connected and undamaged. If these steps do not resolve the issue, it may be necessary to seek professional repairs.

Possible Causes Of The Dewalt Weed Eater Spin Problem

When a Dewalt weed eater spins, several potential causes could contribute to the problem. One possibility is that the trimmer head may clog with debris, hindering its spinning motion. Another potential cause is a damaged or broken drive shaft or flex shaft, which can prevent the weed eater from spinning properly.

Worn-out or damaged clutch assemblies can also result in a lack of spinning motion. Additionally, a malfunctioning motor or engine could be the culprit behind the problem. Before attempting any repairs or replacements, it’s crucial to troubleshoot and identify the specific cause of the issue.

Conclusion

If your Dewalt Weed Eater is not spinning, it is essential to address the issue promptly to avoid hindering your gardening and landscaping tasks. A malfunctioning weed eater can lead to frustration and delays in completing your projects. Our comprehensive problem-fixing guide on dewalt weed eater won’t spin provides step-by-step instructions on troubleshooting and resolving the issue.

It is important to check for common causes such as loose or worn parts, foreign objects, and belt issues. You can ensure smooth operation and optimal performance by properly maintaining and caring for your Dewalt Weed Eater. If you are still experiencing difficulties, it may be necessary to seek professional assistance.

Frequently Asked Questions