Tyroc Subfloor – The Ultimate Flooring Solution

Tyroc subfloor is a revolutionary building material that has taken the construction industry by storm. It is a unique subfloor system that is designed to address the common problems that are associated with traditional subflooring products.

this subfloor is made from a combination of recycled rubber and plastic, which makes it an eco-friendly and sustainable option. Its unique design allows it to provide superior soundproofing and insulation properties, which makes it ideal for use in homes, offices, and other commercial properties.

One of the biggest advantages of the subfloor is its ease of installation. Unlike traditional subflooring products, subfloor requires no special installation tools or skills. It can be easily cut and fitted to any size or shape, making it an ideal choice for new construction and renovation projects.

The subfloor is also highly durable and resistant to moisture, which means it can withstand even the harshest environments. So if you are looking for a high-quality, eco-friendly subflooring solution that is easy to install and lasts for years, look no further than the subfloor.

Types Of Subfloors Available In The Market

Each type of subfloor has its advantages and considerations, and the choice depends on factors like budget, location, intended use, and the type of finished flooring to be installed. Various types of subfloors are available in the market to provide a stable and even surface for finished flooring materials. Some common types include

• Plywood Subfloor: Made from layers of wood veneer, plywood is a popular and versatile subflooring material.
• Oriented Strand Board (OSB): OSB comprises wood strands and adhesives, offering strength and affordability.
• Concrete Subfloor: Common in basements and ground-level floors, concrete provides a durable, solid subfloor.
• Particleboard: Made from compressed wood particles, particleboard is a cost-effective option for subflooring.
• Gypsum Subfloor: Used for lightweight and non-structural applications, gypsum subfloor offers fire resistance.
• AdvanTech Subflooring: Engineered wood subfloor panels with moisture resistance and high-performance properties.
• Cement Backer Board: Used as a subfloor for tile and stone installations, cement backer board provides stability.

Tools Required For Installing Subfloor

You will need a few tools to ensure proper installation when installing a subfloor. Always follow the manufacturer’s guidelines and recommendations when installing the subfloor to ensure proper performance and effectiveness. Tyroc is a specialized subflooring product that combines insulation, moisture barrier, and subfloor in one. Here are the tools you will need:

• Utility Knife: A sharp utility knife will be necessary for cutting the Tyroc panels to fit around obstacles, corners, and edges.
• Measuring Tape: Accurate measurements are crucial for cutting the Tyroc panels to the correct size, so a measuring tape is essential.
• Straight Edge or T-Square: A straight edge or T-square will help you achieve clean, straight cuts on the Tyroc panels.
• Circular Saw or Jigsaw: A circular saw or jigsaw with a fine-toothed blade can make more extensive cuts on the Tyroc panels.
• Pencil or Marker: You’ll need a pencil or marker to mark the cutting lines on the Tyroc panels.
• Knee Pads: Since you’ll be working on the floor for an extended period, knee pads will provide comfort and protection for your knees.
• Safety Glasses: Always wear safety glasses to protect your eyes during cutting and installation.
• Rubber Mallet: A rubber mallet can gently tap the Tyroc panels into place and ensure a snug fit.
• Construction Adhesive: You’ll need adhesive to secure the Tyroc panels to the subfloor or concrete slab.
• Subfloor Screws or Nails: Depending on the installation instructions, you may need screws or nails to fasten the Tyroc panels to the subfloor or the underlying surface.

How To Install Of Tyroc Subfloor

One of the key benefits of a subfloor is that it provides a strong and stable base for your flooring. Its high-density foam construction ensures your flooring stays level and does not sag over time. This is especially important for hardwood flooring, which requires a stable subfloor to prevent damage and warping.

Subfloor is an important investment for any home renovation project. Its benefits include a strong and stable base for your flooring, moisture resistance, and easy installation. With the subfloor, you can enjoy a beautiful, long-lasting, and worry-free flooring solution for your home. Here are explained how to install tyroc subfloor.

Prepare The Subfloor

Before installing the subfloor, you must ensure the concrete slab is clean, dry, level and free of cracks or defects. You can use a vacuum, broom or mop to remove dust or debris. You can also use a self-levelling or patching compound to fill gaps or holes. Also, You should check the moisture level of the concrete with a moisture meter or a plastic sheet test. If the moisture level is too high, you may need a dehumidifier or a waterproofing membrane.

Lay The Vapor Barrier

A vapour barrier is a thin layer of plastic that prevents moisture from rising from the concrete to the subfloor. You can use 6-mil polyethene sheeting as a vapour barrier for the subfloor. Should unroll the sheeting over the entire floor area, leaving some extra material along the walls. You should overlap the seams by at least 6 inches and tape them with duct tape. Also, You should cut around any pipes, drains or obstacles and seal them with caulk or silicone.

Place The Tyroc Panels

Tyroc panels are 16 inches by 48 inches and have tongue and groove edges that interlock with each other. You should start laying the panels from one corner of the room, leaving a 1/4-inch gap along the walls for expansion. You should align the panels so that the rubber side faces down and the white side faces up. Also, You should stagger the joints by at least 8 inches for better stability. You can use a rubber mallet to tap the panels into place.

Cut The Panels To Fit

When you reach the end of a row or encounter an obstacle, you may need to cut the panels to fit. You can use a circular saw, a jigsaw or a utility knife to cut Tyroc panels. You should measure and mark the cutting line on the panel and place it on a stable surface. When cutting, you should wear safety glasses and gloves and follow the manufacturer’s instructions. You should also ensure the cut edge fits snugly against the wall or obstacle.

Secure The Panels

Tyroc panels do not require nails, screws or glue to secure them to the floor. However, you may want to use some fasteners to prevent any movement or squeaking of the panels. You can use 1 1/4 inch flooring screws or 18 gauge narrow crown staples to fasten Tyroc panels. You should use one fastener per panel at each corner and one in the centre. Also, You should avoid driving fasteners too deep or close to the edges.

Seal The Joints

To prevent any moisture or dirt from getting into the joints between Tyroc panels, seal them with Tyroc joint sealant. This is a flexible and waterproof compound that comes in a caulking tube. You should apply a thin bead of sealant along all the joints and smooth it with your finger or a spatula. You should wipe off any excess sealant with a damp cloth and let it dry for at least 24 hours.

Add Transition Strips

Transition strips are metal or wood strips that cover the gap between different types of flooring. You may need to use transition strips if you have carpet, tile, hardwood or laminate flooring on the subfloor. You should choose transition strips that match your flooring style and color and follow their installation instructions. Also, You may need to drill holes and use adhesive or nails to attach transition strips to the subfloor.

Test The Subfloor

After installing the subfloor, you should test it for any problems or defects. You should walk over every part of the subfloor and listen for any squeaks, cracks or bumps. You should also check for any gaps, loose panels or uneven surfaces. If you find any issues, you should fix them before installing your final flooring.

Comparison Of This Subfloor With Other Types Of Subfloors

This subfloor is one of several options for basement subfloors, along with Dricore, Barricade and plywood/OSB. Each subfloor type has pros and cons regarding durability, moisture resistance, installation ease and cost. Here is a brief comparison of the subfloor with other types of subfloors:

• This subfloor is more durable than plywood/OSB, which can delaminate, warp or rot when exposed to moisture. This subfloor is more consistent than plywood/OSB, which can have knots or weak spots. However, This subfloor is less durable than Dricore or Barricade, which have a higher density and weight capacity.
• This subfloor is more moisture-resistant than plywood/OSB, which can swell, buckle or mould when wet. This subfloor has a rubber base layer and a magnesium oxide top layer that repels water and prevents vapour transmission. However, Tyroc-subfloor is less moisture resistant than Dricore or Barricade, which have an air gap technology that creates a thermal break and allows the concrete to breathe.

Cost Of Tyroc-Subfloor

If you want to install Tyroc-subfloor in a 500-square-foot basement, you can expect to pay about $1,750 for materials and $1,000 for labour, for a total of $2,750. The cost of a Tyroc-subfloor depends on several factors, such as the size of the area, the availability of the product and the labour involved. However, a rough estimate of the cost of the Tyroc-subfloor can be calculated as follows:

• Material cost: This is the cost of buying Tyroc panels, vapour barrier, fasteners, sealant and transition strips. The material cost can vary depending on the retailer and the quantity. However, the average material cost for Tyroc-subfloor is about $1.50 per square foot.
• Labor cost: The cost of hiring a professional installer to install the Tyroc-subfloor. The labour cost can vary depending on the location, the complexity and the quality of the work. However, the average labour cost for Tyroc-subfloor is about $2.00 per square foot.
• Total cost: This is the sum of the material and labour costs. The total cost can vary depending on the factors mentioned above. However, the total cost for Tyroc-subfloor is about $3.50 per square foot.

Conclusion

Using Tyroc subfloor has proven to be a successful solution for many flooring projects. This innovative subflooring system offers a variety of benefits, from moisture resistance to noise reduction and thermal insulation. With Tyroc, you can rest assured that your flooring will be durable and long-lasting, as it is designed to withstand heavy traffic and remain stable over time.

Additionally, the easy installation process of the subfloor saves both time and money, making it a cost-effective choice for any project. The results speak for themselves, as the subfloor is a reliable and effective solution for any flooring need. Whether renovating your home or building a new commercial space, the subfloor is the answer for a successful and lasting flooring project.

Frequently Asked Questions

[rank_math_rich_snippet id=”s-314bb66f-aae5-42e8-a7eb-ae49ec266c2f”]